Forest fire prevention video surveillance solution

For the monitoring of trees and forests, according to customer needs, monitoring sites will be set up at the entrances of forests, mountains, mountain tops, etc., and alarm mechanisms will be installed to avoid man-made or accidental forest fires, and to quickly stop fighting. The whole plan can be used for forestry. Dynamic intelligent management and control of resources will be implemented. While maintaining the greening achievements of forestry resources, technical means will be used to supplement the lack of manpower, and the overall intelligent management and control of the system will be improved. Effectively prevent and control fire hazards in forest areas, and severely crack down on illegal acts such as deforestation, afforestation and piracy. Prevent serious loss of forest resources and global environmental pollution.  front end The front-end is mainly composed of fire-proof and explosion-proof 360-degree high-definition cameras, protective covers, amplification systems, video encoders, and lightning protection, installation brackets and basic equipment for the entire front-end.  Transmission local The digital information transmission video monitoring system consists of: digital network bridge, POE power supply AC switch, convergent AC switch; the transmission network can use optical fiber transmission network, which can transmit the live images captured by cameras and lenses to the command center in real time.  The front-end of wireless transmission conditions adopts microwave mode to transmit live images captured by cameras and lenses to the command center in real time.  central part The operating system should have good stability. If a hidden danger is found, the monitoring (command) center will immediately send an alarm signal and locate the ignition point on the GIS map. , disaster damage assessment and other functions. 1. The system monitoring image can be transmitted to the command center at the first time, and the forest fire can be identified at the first time.  2. When a fire breaks out, it can accurately locate the fire point and automatically generate an alarm.  3. The forest area monitoring and management command center is watching. Monitor the fire status of each monitoring point in real time, and remotely control the PTZ camera to stop control.  4. After the alarm, once the fire situation is confirmed, the commanding rescue personnel can view the live video in real time through the large screen.  5. After the forest fire breaks out, the system can make a relatively accurate evaluation of the affected area and disaster losses.  6. The system needs to support the separation of video and map, and administrators can understand the location of forest fires on the map.  7. The front-end system needs to provide an effective power supply method, which can ensure the continuous and reliable operation of the equipment throughout the year.  8. Most of the front-end equipment is installed in an unattended environment, and it is necessary to manage the front-end equipment through effective safety precautions.  9. The application of effective transmission methods can transmit the front-end surveillance video to the background command center.